Hyundai Creta: Tail Gate / Tail Gate Weatherstrip: Repair procedures

Replacement
1.
Remove the tail gate weatherstrip (A).
  
•
Do not apply sealant to the body.

2.
To install, reverse the removal procedure.
  
•
Install the weatherstrip aligned with canter line (B).
Tail Gate Lift: Repair procedures
Replacement    • Take care to not let the tailgate fall on you as the lifts are r ...

Fuel Filler Door
...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Intake Manifold
Components and components location Components 1. Intake manifold 2. MAP semsor 3. Electronic throttle body 4. Intake manifold gasket 5. Electronic throttle body gasket 6. VIS actuator Repair procedures Removal and Installation ...

Hyundai Creta GS 2014-2019 Service Manual: Wheel: Repair procedures
Inspection Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque (Front) : 88.25 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) Tightening torque (Rear) : 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

© 2017-2026 www.hcrmangs.com