Hyundai Creta: Specifications & Consumer information / Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance for normal driving.
The tire label located on the driver's side (or front passenger’s side) center pillar gives the tire pressures recommended for your car.
Vehicle certification label
The vehicle certification label
attached on the driver’s (or front passenger’s)
side center pillar gives the
vehicle identification number (VIN). ...
Engine number
The engine number is stamped on
the engine block as shown in the
drawing. ...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: General information
General Information
The supplemental restraint system (SRS) is designed to supplement the seat belt
to help reduce the risk or severity of injury to the driver and passenger by
activating and deploying the driver, passenger, side airbag and belt pretensioner
in certain front ...
Hyundai Creta GS 2014-2019 Service Manual: Wheel: Repair procedures
Inspection
Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque (Front) :
88.25 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Tightening torque (Rear) :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...
