Hyundai Creta: Tires and wheels / Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. Slow down whenever there is rain, snow or ice on the road, to reduce the possibility of losing control of the vehicle.
Wheel replacement
When replacing the metal wheels for
any reason, make sure the new
wheels are equivalent to the original
factory units in diameter, rim width
and offset.
WARNING
A wheel that is not the corre ...
Tire maintenance
In addition to proper inflation, correct
wheel alignment helps decrease tire
wear. If you find a tire worn unevenly,
have your dealer check the wheel
alignment.
When you have new tires instal ...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: SS-A Solenoid Valve (ON/OFF)
Description and operation
Description
•
SS-A solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears.
•
SS-A Solenoid valve (ON/OFF) is installed at valve body.
...
Hyundai Creta GS 2014-2019 Service Manual: Ignition Coil
Description and operation
Description
An ignition coil is an induction coil in an engine's ignition system which transforms
the battery's low voltage to the high voltage needed to create an electric spark
in the spark plugs to ignite the fuel. Coils have an internal re ...
