Hyundai Creta: Maintenance / Tires and wheels
Tire care
For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommended for your vehicle.
- Recommended cold tire inflation pressures
- Checking tire inflation pressure
- Tire rotation
- Wheel alignment and tire balance
- Tire replacement
- Wheel replacement
- Tire traction
- Tire maintenance
- Tire sidewall labeling
- Low aspect ratio tire
Reset items
Items should be reset after the battery
has been discharged or the battery
has been disconnected.
Auto up/down window
(See chapter 3)
Climate control system
(See chapter 3)
Audio (Se ...
Recommended cold tire inflation
pressures
All tire pressures (including the
spare) should be checked when the
tires are cold. “Cold Tires” means the
vehicle has not been driven for at
least three hours or driven less than
1.6 km ...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Variable Intake Solenoid (VIS) Valve
Description and operation
Description
Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold.
The VIS valve controls the vacuum modulator which activates a valve in the intake
manifold. The ECM opens or closes this valve according to engine condition ...
Hyundai Creta GS 2014-2019 Owners Manual: Automatic transaxle operation
The automatic transaxle has six forward
speeds and one reverse speed.
The individual speeds are selected
automatically in the D (Drive) position.
WARNING
To reduce the risk of serious injury
or death:
ALWAYS check the surrounding
areas near your vehicle for people,
especially chil ...
