Hyundai Creta: General Information / Troubleshooting

Hyundai Creta GS 2014-2019 Service Manual / Clutch System / General Information / Troubleshooting

Troubleshooting

Symptom	Suspected Area	Remedy
Clutch grabs/chatters	Engine mounting (Loose)	Tighten the engine mounting.
	Clutch disc assembly (Excessive runout)	Inspect the clutch disc.
	Clutch disc assembly (Oily)	Inspect the clutch disc.
	Clutch disc assembly (Worn out)	Replace the clutch disc.
	Clutch disc torsion spring (Damaged)	Replace the clutch disc.
	Clutch disc assembly (Glazed)	Inspect the clutch disc.
	Diaphragm spring (Out of alignment)	Replace the clutch disc.
Clutch pedal spongy	Clutch line (Air in line)	Perform the air bleeding.
	Master cylinder (Damaged)	Replace the master cylinder.
	Release cylinder (Damaged)	Replace the release cylinder.
Clutch noisy	Clutch release bearing assembly (Worn, dirty or damaged)	Repair or replace to release bearing.
Clutch slips	Clutch disc assembly (Oily)	Inspect the clutch disc.
	Clutch disc assembly (Worn out)	Replace the clutch disc.
	Diaphragm spring (Damaged)	Replace the clutch disc.
	Pressure plate (Distorted)	Replace the clutch disc.
	Flywheel (Distorted)	Replace the flywheel.
Clutch does not disengage	Clutch line (Air in line)	Perform the air bleeding.
	Master cylinder (Damaged)	Replace the master cylinder.
	Release cylinder (Damaged)	Replace the release cylinder.
	Clutch disc assembly (Out of line)	Replace the clutch disc.
	Clutch disc assembly (Excessive runout)	Replace the clutch disc.
	Clutch disc assembly (Lining broken)	Replace the clutch disc.
	Clutch disc assembly (Dirty or burned)	Repair or replace to release bearing.
	Clutch disc assembly (Oily)	Inspect the clutch disc.
	Clutch disc assembly (Lack of spline grease)	Apply the grease to spline.

Special service tools

Special Service Tools Tool (Number and name) Illustration Use 09411-1P000 Clutch disc guide Install ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Ambient Temperature Sensor
Description and operation Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature. The s ...

Hyundai Creta GS 2014-2019 Service Manual: Wheel: Repair procedures
Inspection Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque (Front) : 88.25 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) Tightening torque (Rear) : 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...