Hyundai Creta: General Information / Troubleshooting
Hyundai Creta GS 2014-2026 Service Manual / Manual Transaxle System / General Information / Troubleshooting
| Troubleshooting |
|
Symptom |
Suspected Area |
Remedy |
|
Abnormal noise |
Oil level (Low) |
To adding oil after inspect the parts (Oil seal, Drain plug, filler plug). |
|
Oil (Wrong) |
Replace the oil. |
|
|
Synchronizer ring (Worn or damaged) |
Replace the synchronizer ring. |
|
|
Gear (Worn or damaged) |
Replace the gear. |
|
|
Bearing (Worn or damaged) |
Replace the bearing. |
|
|
Oil leak |
Oil level (High) |
Inspect the oil level. |
|
Gasket (Damaged) |
Replace the gasket. |
|
|
Oil seal (Worn or damaged) |
Replace the oil seal. |
|
|
Hard shifting or impossible to shift |
Oil (Wrong) |
Replace the oil. |
|
Clutch (Dragging) |
Inspect the clutch parts (Release fork & bearing, Clutch disc) |
|
|
Shift fork (Worn) |
Replace the shift fork. |
|
|
Synchronizer ring (Worn or damaged) |
Replace the synchronizer ring. |
|
|
Gear (Worn or damaged) |
Replace the gear. |
|
|
Hub sleeve (Worn or damaged) |
Replace the hub sleeve. |
|
|
Jumps out of gear or shift lever moves excessively |
Shift fork (Worn) |
Replace the shift fork. |
|
Hub sleeve (Worn or damaged) |
Replace the hub sleeve. |
|
|
Gear (Worn or damaged) |
Replace the gear. |
|
|
Bearing (Worn or damaged) |
Replace the bearing. |
Special service tools
Special Service Tools
Tool (Number and Name)
Illustration
Use
09200-3N000
Engine support fixture (Beam)
...
Other information:
Hyundai Creta GS 2014-2026 Owners Manual: If the engine will not start
If the engine doesn't turn over or
turns over slowly
Be sure the shift lever is in N
(Neutral) or P (Park) if it is an automatic
transaxle vehicle. The engine
starts only when the shift lever is in
N (Neutral) or P (Park).
Check the battery connections to
be sure they are ...
Hyundai Creta GS 2014-2026 Service Manual: Description and operation
Warning Lamp Activation
Warning Lamp Behavior
after Ignition On
As soon as the operating voltage is applied to the SRSCM ignition input, the
SRSCM activates the warning lamp for a LED lamp check.
The lamp shall turn on for 6 seconds during the initialization ...
В© 2017-2026 www.hcrmangs.com
