Hyundai Creta: Intake And Exhaust System / Variable Intake Solenoid(VIS) Actuator: Repair procedures

Hyundai Creta GS 2014-2024 Service Manual / Engine Mechanical System / Intake And Exhaust System / Variable Intake Solenoid(VIS) Actuator: Repair procedures

Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Remove the air cleaner assembly.
(Refer to Intake and Exhaust System - "Air Cleaner")
3.
Disconnect the lever (A) and hose (B).
4.
Loosen the mounting bolts and then remove the VIS actuator (C).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

5.
Install in the reverse order of removal.
Air Cleaner
Components and components location Components 1. Air duct 2. Air cleaner lower cover 3. Air cleaner element 4. Air cleaner upper cover 5. Air intake hose ...

Intake Manifold
Components and components location Components 1. Intake manifold 2. MAP semsor 3. Electronic throttle body 4. Intake manifold gasket 5. Electronic throttl ...

Other information:

Hyundai Creta GS 2014-2024 Service Manual: Valve Body
Description and operation Description The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regulator valves, oil redirection valves, shift valves ...

Hyundai Creta GS 2014-2024 Service Manual: Components and components location
Component Location 1. Rear glass defogger relay (Buil-in engine room relay box) 2. Rear glass defogger switch (Dual type) 3. Rear glass defogger switch (Manual type) 4. Rear glass defogger ...

© 2017-2024 www.hcrmangs.com