Hyundai Creta: Specifications & Consumer information / Vehicle certification label
The vehicle certification label attached on the driver’s (or front passenger’s) side center pillar gives the vehicle identification number (VIN).
Vehicle identification number (VIN)
The vehicle identification number
(VIN) is the number used in registering
your car and in all legal matters
pertaining to its ownership, etc.
The number is punched on the floor
under the fr ...
Tire specification and pressure label
The tires supplied on your new vehicle
are chosen to provide the best
performance for normal driving.
The tire label located on the driver's
side (or front passenger’s side) center
pi ...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Special service tools
Special Service Tools
Tool (Number and Name)
Illustration
Use
09200-3N000
Engine support fixture (Beam)
Removal and installation of the transmission.
Use this beam (SST No. : 09200-3N000) with the ...
Hyundai Creta GS 2014-2019 Service Manual: Accelerator Pedal: Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
terminal.
2.
Disconnect the accelerator position sensor connector (A).
3.
Remove the mounting nuts (B).
...
