Hyundai Creta: Tires and wheels / Wheel replacement
When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset.
WARNING
A wheel that is not the correct size may adversely affect wheel and bearing life, braking and stopping abilities, handling characteristics, ground clearance, body-to-tire clearance, snow chain clearance, speedometer and odometer calibration, headlight aim and bumper height.
Tire replacement
If the tire is worn evenly, a tread wear
indicator will appear as a solid band
across the tread. This shows there is
less than 1.6 mm (1/16 inch) of tread
left on the tire. Replace the tire ...
Tire traction
Tire traction can be reduced if you
drive on worn tires, tires that are
improperly inflated or on slippery
road surfaces. Tires should be
replaced when tread wear indicators
appear. Slow dow ...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Rear Door Outside Handle
Components and components location
Component Location
1. Rear door outside handle
Repair procedures
Replacement
1.
Remove the hole plug.
2.
After loosening the mounting bolt, then remove ...
Hyundai Creta GS 2014-2019 Service Manual: Transaxle Control Module (TCM)
Description and operation
Description
•
Monitoring the vehicle's operating conditions to determine the optimal
gear setting.
•
Performing a gear change if the current gear setting differs from the
identified optimal g ...
