Hyundai Creta: Evaporative Emission Control System / Canister: Repair procedures

Removal
1.
Remove the fuel tank.
(Refer to Fuel Delivery System - "Fuel Tank")
2.
Disconnect the vapor hose quick-connectors (A) and ventilation hose (B).

3.
Remove the protector mounting bolts (A).
4.
Remove the canister assembly.

5.
Remove the canister bracket after loosening the mounting bolts (A).

Inspection
1.
Check for the following items visually.
Cracks or leakage of the canister
Loose connection, distortion, or damage of the vapor hose/tube

A: Canister ↔ Atmosphere
B: Canister ↔ Fuel Tank
C: Canister ↔ Intake Manifold
Installation
1.
Install in the reverse order of removal.
Canister installation bolt :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Schematic diagrams
Schematic Diagram Canister Canister is filled with charcoal and absorbs evaporated vapor in fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold ...

Fuel Filler Cap: Description and operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel f ...

Other information:

Hyundai Creta GS 2014-2025 Owners Manual: Sunglass holder
To open the sunglass holder, press the cover and the holder will slowly open. Place your sunglasses in the compartment door with the lenses facing out. To close the sunglass holder, push back into position. Make sure the sunglass holder is closed while driving. WARNING Do not kee ...

Hyundai Creta GS 2014-2025 Service Manual: Knock Sensor (KS)
Description and operation Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. When knocking occurs, the vibration from the cylind ...

© 2017-2025 www.hcrmangs.com