Hyundai Creta: Blower / Climate Control Air Filter

Hyundai Creta GS 2014-2019 Service Manual / Heating, Ventilation and Air Conditioning / Blower / Climate Control Air Filter

Description and operation

Description

The climate control air filter is located in the blower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter as well as a conventional dust filter to ensure comfortable interior environment.

Repair procedures

Replacement

1.	Remove the glove box (A).

2.	Remove the filter cover (A) by pressing the knob.

Replace the air filter (A) with a new one according to the direction of air filter.

•	To remove the filter easily, press the right side inward then pull out the filter.

•	In case of driving in an air-polluted area or rugged terrain, check and replace the air filter as frequently as possible.

4.	Install in the reverse order of removal.

Power Mosfet (DATC)

Description and operation Description It is installed to the DATC and adjusts the fan rpm by precisely controlling the voltage applied to the blower motor. Repair procedures ...

Intake Actuator

Components and components location Components Location 1. Intake actuator Description and operation Description The intake actuator i ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: General safety information and caution
Precautions General Precautions Please read the following precautions carefully before performing the airbag system service. Observe the instructions described in this manual, or the airbags could accidentally deploy and cause damage or injuries. • ...

Hyundai Creta GS 2014-2019 Service Manual: Description and operation
Description Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the memory of the ECM (Engine Control Module). The engine operating conditio ...