Hyundai Creta: Lighting System / High Mounted Stop Lamp: Repair procedures

Removal
High Mounted Stop Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear spoiler.
(Refer to Body - "Rear Spoiler")
3.
Remove the high mounted stop lamp assembly (A) after loosening screws (4EA).

4.
Remove the mounted stop lamp connector (A).

Installation
1.
Install the high mounted stop lamp.
2.
Install the rear spoiler.
3.
Connect the negative (-) battery terminal.
License Lamps: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim. (Refer to Body - "Tail Gate Trim") ...

Luggage Room Lamp: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage room lamp assembly (A) after disconnecting the connector. ...

Other information:

Hyundai Creta GS 2014-2020 Service Manual: Mode Control Actuator
Components and components location Components Location 1. Mode control actuator Description and operation Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the ...

Hyundai Creta GS 2014-2020 Owners Manual: Wipers and washers
A : Wiper speed control (front) / MIST – Single wipe O / OFF – Off --- / INT – Intermittent wipe AUTO* – Auto control wipe 1 / LO– Low wiper speed 2 / HI – High wiper speed B : Intermittent control wipe time adjustment C : Wash with brief wipes (front) D : Rear wip ...

© 2017-2020 www.hcrmangs.com