Hyundai Creta: Interior Trim / Luggage Side Trim
Components and components location
Repair procedures
| • |
Put on gloves to protect your hands.
|
|
| • |
When prying with a flat-tip screwdriver or use a prying trim
tool, wrap it with protective tape, and apply protective tape
around the related parts, to prevent damage.
|
| • |
Use a plastic panel removal tool to remove interior trim pieces
to protect from marring the surface.
|
| • |
Take care not to bend or scratch the trim and panels.
|
|
| 1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
| 2. |
Remove the rear seat back assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
| 3. |
Remove the rear door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
|
| 4. |
Remove the rear transverse trim.
(Refer to Interior Trim - "Rear Transverse Trim")
|
| 5. |
After loosening the mounting bolts, then remove the rear seat folding
bracket (A).
|
| 6. |
To install, reverse the removal procedure.
| •
|
Replace any damaged clips.
|
|
|
Components and components location
Component Location
1. Rear transverse trim
Repair procedures
Replacement
...
Components and components location
Component Location
1. Rear pillar trim
Repair procedures
Replacement
&nb ...
Other information:
Hyundai Creta GS 2014-2024 Service Manual: Compressor
Description and operation
Description
The compressor is the power unit of the A/C system.
It is located on the side of engine block and driven by a V-belt of the engine.
The compressor changes low-pressure and low-temperature refrigerant gas into
high-pressure and high-te ...
Hyundai Creta GS 2014-2024 Owners Manual: Closing the hood
1. Before closing the hood, check the
following:
All filler caps in engine compartment
must be correctly installed.
Gloves, rags or any other combustible
material must be removed
from the engine compartment.
2. Return the support rod to its clip to
prevent it from rattling.
3. ...
Rear Transverse Trim
Rear Pillar Trim