Hyundai Creta: Automatic transaxle / Parking
Always come to a complete stop and continue to depress the brake pedal. Move the shift lever into the P (Park) position, apply the parking brake, and place the ignition switch in the LOCK/OFF position. Take the Key with you when exiting the vehicle.
WARNING
When you stay in the vehicle with the engine running, be careful not to depress the accelerator pedal for a long period of time. The engine or exhaust system may overheat and start a fire.
The exhaust gas and the exhaust system are very hot. Keep away from the exhaust system components.
Do not stop or park over flammable materials, such as dry grass, paper or leaves. They may ignite and cause a fire.
Automatic transaxle operation
The automatic transaxle has six forward
speeds and one reverse speed.
The individual speeds are selected
automatically in the D (Drive) position.
WARNING
To reduce the risk of serious injury
...
Good driving practices
Never move the shift lever from P
(Park) or N (Neutral) to any other
position with the accelerator pedal
depressed.
Never move the shift lever into P
(Park) when the vehicle is in
...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Clutch Pedal
Components and components location
Components
1. Clutch pedal assembly
2. Clutch pedal arm
3. Ignition lock & clutch switch
4. Washer
5. Snap pin
6. Master cylinder
7. Reservoir hose
Repair procedures
Removal
1. ...
Hyundai Creta GS 2014-2019 Service Manual: Crankshaft
Components and components location
Components
1. Crankshaft sprocket
2. Crankshaft thrust bearing
3. Crankshaft upper main bearing
4. Crankshaft
5. CKPS wheel
6. Crankshaft lower main bearing
7. Crankshaft main bearing cap
Repair pr ...
