Hyundai Creta: Braking system / Power brakes

Your vehicle has power-assisted brakes that adjust automatically through normal usage.

If the engine is not running or is turned off while driving, the power assist for the brakes will not work. You can still stop your vehicle by applying greater force to the brake pedal than typical. The stopping distance, however, will be longer than with power brakes.

When the engine is not running, the reserve brake power is partially depleted each time the brake pedal is applied. Do not pump the brake pedal when the power assist has been interrupted.

Pump the brake pedal only when necessary to maintain steering control on slippery surfaces.

WARNING

Take the following precautions:

Braking system
...

Disc brakes wear indicator
When your brake pads are worn and new pads are required, you will hear a high pitched warning sound from your front or rear brakes. You may hear this sound come and go or it may occur whenev ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: 35R Clutch Control Solenoid Valve (35R/C_VFS)
Description and operation Description • 35R Clutch control solenoid valve (35R/C) is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the 35R clutch. ...

Hyundai Creta GS 2014-2019 Service Manual: Seat Belt Pretensioner (BPT)
Description and operation Description The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce the severity of injury to the front seat occupan ...

© 2017-2019 www.hcrmangs.com