Hyundai Creta: Front Bumper / Radiator Grill

Components and components location

Component Location

1. Radiator grill


Repair procedures

Replacement
  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Cover")
2.
Detach the clips, then remove the front bumper energy absorber (A).
3.
Unlock the lock pins by pushing it up with a screwdriver or remover and then remove the radiator grill (B).

4.
To install, reverse the removal procedure.
  
Replace any damaged clips.
Front Bumper Cover
Components and components location Component Location 1. Front bumper cover Repair procedures Replacement & ...

Rear Bumper
...

Other information:

Hyundai Creta GS 2014-2021 Service Manual: Passenger Airbag (PAB) Module
Description and operation Description The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB.    ...

Hyundai Creta GS 2014-2021 Service Manual: Troubleshooting
Troubleshooting Trouble Symptom Probable Cause Remedy Vehicle pulls to one side Scoring of driveshaft ball joint Replace Wear, rattle or scoring of wheel bearing Replace ...

© 2017-2021 www.hcrmangs.com