Hyundai Creta: Cowl Top Cover / Repair procedures

Replacement
1.
Remove the cap (A) and remove the nuts, then remove the wiper arm (B).
Tightening torque :
22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)

2.
Disconnect the nozzle hose (B).
3.
Detach the clips, then remove the cowl top cover (A).

4.
To install, reverse the removal procedure.
  
•
Replace any damaged clips.
Components and components location
Component Location 1. Cowl top cover ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Troubleshooting
Standard Flow of Diagnostic Troubleshooting Notes With Regard To Diagnosis The phenomena listed in the following table are not abnormal. Condition Explanation System check sound When starting the engine, a thudding sound can so ...

Hyundai Creta GS 2014-2019 Service Manual: Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symptom is detected, perform necessary remedy and inspection. ...

© 2017-2026 www.hcrmangs.com