Hyundai Creta: General Information / Troubleshooting

Troubleshooting
Trouble Symptom
Cause of the symptom
Remedy
Excessive play in steering
Loose U-joint bolt
Retighten or replace as necessary
Loose yoke plug
Retighten
Loose steering gear mounting bolts
Retighten
Loose or worn tie rod end
Retighten or replace as necessary
Steering wheel does not return to its original position
Excessive turning resistance of tie rod end
Replace
Yoke plug excessively tight
Adjust
Tie rod and/or ball joint cannot turn smoothly
Replace
Loose mounting of gear box at the subframe
Retighten
Worn steering shaft joint and/or body grommet
Correct or replace
Distorted rack
Replace
Rattling or chucking noise in the rack and pinion
Loose steering gear box mounting
Reposition
Loose tie rod end and/or ball joint
Repace
Worn tie rod and/or ball joint
Repace
Loose yoke plug
Replace

  
•
After retightening, check the tightening torque.
(Refer to Steering System - "Specifications")
Special service tools
Special Service Tools Tool (Number and Name) IIIustration Use 09568-1S100 Ball joint remover Ball j ...

Repair procedures
Service Adjustment Procedure Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels are placed in the straight ahe ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: SRS Control Module (SRSCM)
Description and operation Description The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does not. The SRSCM must decide whether to deploy the restrain ...

Hyundai Creta GS 2014-2019 Service Manual: Power Door Lock Switch: Repair procedures
Diagnosis with GDS 1. The BCM can be diagnosed by using the GDS. The BCM communicates with the GDS which then displays inputs and outputs along with codes. It will be able to diagnose defects of power door lock/unlock with GDS quickly. GDS can operat ...

© 2017-2026 www.hcrmangs.com