Hyundai Creta: Body Side Molding / Fender Garnish: Repair procedures
| • |
Put on gloves to protect your hands.
|
|
| • |
When prying with a flat-tip screwdriver or use a prying trim
tool, wrap it with protective tape, and apply protective tape
around the related parts, to prevent damage.
|
| • |
Take care not to scratch the body surface.
|
|
| 1. |
Loosen the fender garnish mounting screws.
|
| 2. |
Using a screwdriver or remover, remove the fender garnish (A).
|
| 3. |
To install, reverse the removal procedure.
| •
|
Replace any damaged clips.
|
|
|
Replacement
•
Put on gloves to protect your hands.
...
Replacement
•
Put on gloves to protect your hands.
...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: General information
The Micro 570 Analyzer
The Micro 570 Analyzer provides the ability to test the charging and starting
systems, including the battery, starter and alternator.
※ Because of the possibility of personal injur ...
Hyundai Creta GS 2014-2019 Owners Manual: Key ignition switch
WARNING
NEVER turn the ignition switch
to the LOCK or ACC position
while the vehicle is in motion
except in an emergency. This
will result in the engine turning
off and loss of power assist for
the steering and brake systems.
This may lead to loss of directional
control ...
A Pillar Garnish: Repair procedures
Quarter Garnish: Repair procedures