Hyundai Creta: Fuel Delivery System / Fuel Filter: Repair procedures

Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery system - "Fuel Pump")
2.
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).

3.
Remove the fixing clip (A), and then separate the head assembly (B).

4.
Remove the reservoir-cup (B) after releasing the fixing hooks (A).

5.
Disconnect the electric motor pump connector (A) and the ground cable (B).

6.
Remove the cap (A), and then fuel pressure regulator (B).

7.
Remove the pre-filter (A) after releasing the hook.

8.
Separate the electric pump motor (A).

9.
Remove the fixing clip (A), and then assist pump assembly (B).

10.
Replace new fuel filter.

Installation
1.
Install in the reverse order of removal.
Fuel Pump: Repair procedures
Inspection [Fuel pump] 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the fuel p ...

Fuel Pump Motor: Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the electric pump wiring con ...

Other information:

Hyundai Creta GS 2014-2024 Service Manual: Input Speed Sensor
Description and operation Description • Input speed sensor uses an electric current type hall sensor in which the current is changed by the magnetic variation. • Input speed sensor (A) and output speed sensor are integrated an ...

Hyundai Creta GS 2014-2024 Service Manual: Rear Door Belt Inside Weatherstrip: Repair procedures
Replacement 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Remove the rear door belt inside weatherstrip (A). 3. To install, reverse the removal procedure. ...

© 2017-2024 www.hcrmangs.com