Hyundai Creta: Fuel Delivery System / Fuel Pump Motor: Repair procedures

Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
2.
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).

3.
Remove the fixing clip (A), and then separate the head assembly (B).

4.
Remove the reservoir-cup (B) after releasing the fixing hooks (A).

5.
Disconnect the electric motor pump connector (A) and the ground cable (B).

6.
Remove the cap (A), and then fuel pressure regulator (B).

7.
Remove the pre-filter (A) after releasing the hook.

8.
Separate the electric pump motor (A).

Installation
1.
Install in the reverse order of removal.
Fuel Filter: Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery system - "Fuel Pump") 2. Disconnect the electric pump wiring con ...

Fuel Sender: Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the fuel sender connector ( ...

Other information:

Hyundai Creta GS 2014-2026 Service Manual: Mode Control Actuator
Components and components location Components Location 1. Mode control actuator Description and operation Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the ...

Hyundai Creta GS 2014-2026 Service Manual: Flywheel: Repair procedures
Removal and installation 1. Remove the manual transaxle. (Refer to Manual Transaxle System - "Manual Transaxle") 2. Remove the flywheel (A). Tightening torque : 71.6 ~ 75.5 N.m (7.3 ...

В© 2017-2026 www.hcrmangs.com