Lincoln Nautilus: Lane Keeping System / Lane Keeping System Settings. Alert Mode. Aid Mode
Lane Keeping System Settings
To change the steering wheel vibration, use the instrument cluster display:
- Using the instrument cluster display controls on the steering wheel, select Driver Assist.
- Select Lane Keeping Sys.
- Select Alert Intensity.
- Select a setting.
Alert Mode
What Is Alert Mode
Alert mode vibrates the steering wheel when it detects an unintended lane departure.
How Does Alert Mode Work
When in alert mode, the lane keeping system alerts you by vibrating the steering wheel. The intensity of the vibration is set through the lane keeping system menu.
Aid Mode
What Is Aid Mode
Aid mode provides temporary steering assistance toward the center of the lane.
How Does Aid Mode Work
The lane keeping system aids you when an unintentional lane departure occurs. The system provides a small steering input to move the vehicle towards the center of the lane.
Switching the Lane Keeping System On and Off. Switching the Lane Keeping System Mode
Switching the Lane Keeping System On and Off
To activate the lane keeping
system, press the button on the
turn signal lever.
Note: The system stores the on or off setting
until manually changed, u ...
Alert and Aid Mode
What Is Alert and Aid Mode
Alert and aid mode uses multiple features to
keep you in your lane. The system first
provides a small steering input to bring your
vehicle back towards the center of the ...
Other information:
Lincoln Nautilus 2018-2026 Owners Manual: Lane Keeping System Indicators
If you switch the lane keeping system on, a
graphic with lane markings appears in the
information display.
When you switch the system off, the lane
marking graphics do not display.
Note: The overhead vehicle graphic may still
display if adaptive cruise control is enabled.
While the lane keeping ...
Hyundai Creta GS 2014-2026 Service Manual: Master Cylinder
Components and components location
Components
1. Brake booster
2. Master cylinder assembly
3. Reservior
Repair procedures
Removal
1.
Turm ignition switch OFF and disconnect the negative (-) battery cable.
...
