Lincoln Nautilus: Lane Keeping System / Switching the Lane Keeping System On and Off. Switching the Lane Keeping System Mode

Switching the Lane Keeping System On and Off

To activate the lane keeping system, press the button on the turn signal lever.

Note: The system stores the on or off setting until manually changed, unless it detects a MyKeyâ„¢. If the system detects a MyKeyâ„¢, it defaults to on and the mode is set to alert.

Note: If the system detects a MyKeyâ„¢, pressing the button does not affect the on or off status of the system. You can only change the mode and intensity settings.

Switching the Lane Keeping System Mode

The lane keeping system has different settings that you can view or adjust using the information display.

The system stores the last known selection for each of these settings. You do not need to readjust your settings each time you switch on the system.

To change the lane keeping system mode, use the instrument cluster display:

1. Using the instrument cluster display controls on the steering wheel, select SETTINGS.
2. Select Driver assistance.
3. Select Lane keeping system.
4. Select Mode.
5. Select a mode.

Note: The system remembers the last setting when you start your vehicle. If the system detects a MyKeyâ„¢, it defaults to the last setting for that MyKeyâ„¢.