Hyundai Creta: General Information / Specifications

Specifications
Items
Specifications
Clutch operation method
Hydraulic type
Clutch cover
Type
Diaphragm spring strap
Clutch disc type
Type
Single dry with diaphragm
Facing diameter
(outside × outside)
Gasoline 1.6
Ø225 × Ø150 mm
(Ø8.8583 × Ø5.9055 in.)
Diesel 1.4, 1.6
Diesel 1.4: Ø235 × Ø155mm
(Ø9.2520 × Ø6.1024 in.)
Clutch disc thickness [When free]
8.3 ± 0.3 mm (0.3268 ± 0.0118 in.)
Clutch disc rivet depth
1.1 mm (0.0433 in.)

Service Standard
Item
Specification
Clutch disc rivet depth
0.3 mm (0.0118 in.)

Tightening Torques
Item
N.m
kgf.m
lb-ft
Clutch pedal mounting nut
16.7 ~ 25.5
1.7 ~ 2.6
12.3 ~ 18.8
Ignition lock & clutch switch mounting bolt
2.0 ~ 3.9
0.2 ~ 0.4
1.4 ~ 2.9
Clutch release cylinder bleed plug
6.8 ~ 9.8
0.7 ~ 1.0
5.0 ~ 7.2
Clutch cover mounting bolt (Gasoline 1.6 MPI)
14.7 ~ 21.6
1.5 ~ 2.2
10.8 ~ 15.9
Clutch cover mounting bolt (Diesel 1.4, 1.6)
11.8 ~ 14.7
1.2 ~ 1.5
8.7 ~ 10.8
Clutch release cylinder mounting bolt
14.7 ~ 21.6
1.5 ~ 2.2
10.8 ~ 15.9
Clutch tube bracket mounting bolt
9.8 ~ 14.7
1.0 ~ 1.5
7.2 ~ 10.8

Lubricants
Items
Specified lubricants
Quantity
Clutch release cylinder assembly
Brake fluid DOT 3 or DOT 4
 As required
Clutch pedal shaft and bushings
Chassis grease SAE J310a, NLGI No.1
Input shaft spline
CASMOLY L9508
0.2 g
Release bearing & Fork
0.3 ~ 0.5 g
Release Fork & Fulcrum
0.5 ~ 1.0 g
Release Cylinder & Fork
0.4 ~ 0.8 g
Clutch Release Bearing & Clutch Housing
0.5 ~ 1.0 g

General Information
...

Special service tools
Special Service Tools Tool (Number and name) Illustration Use 09411-1P000 Clutch disc guide Install ...

Other information:

Hyundai Creta GS 2014-2019 Owners Manual: Floor mat anchor(s)
ALWAYS use the Floor Mat Anchors to attach the front floor mats to the vehicle. The anchors on the front floor carpet keep the floor mats from sliding forward. WARNING The following must be observed when installing ANY floor mat to the vehicle. Ensure that the floor mats are s ...

Hyundai Creta GS 2014-2019 Service Manual: Hood Latch
Components and components location Component Location 1. Hood latch assembly Repair procedures Replacement 1. After loosening the mounting clips, then remove the air duct (A). 2. ...

© 2017-2026 www.hcrmangs.com