Lincoln Nautilus: Stability Control / Switching Stability Control On and Off. Stability Control Indicator. Stability Control – Troubleshooting
Switching Stability Control On and Off
The system turns on each time you switch the ignition on.
You can switch the electronic stability control system off by pressing and holding the ESC off button for over 15 seconds, or you can press the button again to switch the system on.
Shifting the transmission into
reverse (R) disables the system.
You can switch the traction control system off or on independently. See Switching Traction Control On and Off.
Stability Control Indicator
If it does not illuminate when
you
switch the power on, or remains
on, this indicates a malfunction.
Have your vehicle checked by an authorized
dealer as soon as possible.
Stability Control – Troubleshooting
Stability Control – Information Messages
How Does Stability Control Work
WARNING: Vehicle modifications
involving braking system, aftermarket roof
racks, suspension, steering system, tire
construction and wheel and tire size may
change the handling characteristics of y ...
Steering
Electric Power Steering
Electric Power Steering Precautions
WARNING: The electric power
steering system has diagnostic checks that
continuously monitor the system. If a fault
is detected, a message ...
Other information:
Hyundai Creta GS 2014-2026 Service Manual: General information
Tightening Torque Table
of Standard Parts
BOLT (Nominal diameter)
NUT (Nominal diameter)
BOLT/NUT Normal screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
...
Hyundai Creta GS 2014-2026 Service Manual: Fender Garnish: Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When ...
