Hyundai Creta: Specifications & Consumer information / Engine number

The engine number is stamped on the engine block as shown in the drawing.

Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side (or front passenger’s side) center pi ...

Air conditioner compressor label
A compressor label informs you the type of compressor your vehicle is equipped with such as model, supplier part number, production number, refrigerant (1) and refrigerant oil (2). ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Rear Coil Spring
Components and components location Components 1. Spring lower pad 2. Spring 3. Spring upper pad Repair procedures Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely s ...

Hyundai Creta GS 2014-2019 Owners Manual: Warning Messages (for Type B, if equipped)
Shift to "P" position (for smart key system and automatic transaxle) This warning message is displayed if you try to turn off the engine without the shift lever in P (Park) position. At this time, the Engine Start/Stop button turns to the ACC position (If you press the Engi ...

© 2017-2019 www.hcrmangs.com