Hyundai Creta: Braking system / Good braking practices

WARNING

Whenever leaving the vehicle or parking, always come to a complete stop and continue to depress the brake pedal. Move the shift lever into the 1st gear (for manual transaxle vehicle) or P (Park, for automatic transaxle vehicle) position, then apply the parking brake, and place the ignition switch in the LOCK/OFF position.

Vehicles parked with the parking brake not applied or not fully engaged may roll inadvertently and may cause injury to the driver and others. ALWAYS apply the parking brake before exiting the vehicle.

Wet brakes can be dangerous! The brakes may get wet if the vehicle is driven through standing water or if it is washed. Your vehicle will not stop as quickly if the brakes are wet. Wet brakes may cause the vehicle to pull to one side.

To dry the brakes, apply the brakes lightly until the braking action returns to normal, taking care to keep the vehicle under control at all times. If the braking action does not return to normal, stop as soon as it is safe to do so and we recommend that you call an authorized HYUNDAI dealer for assistance.

DO NOT drive with your foot resting on the brake pedal. Even light, but constant pedal pressure can result in the brakes overheating, brake wear, and possibly even brake failure.

If a tire goes flat while you are driving, apply the brakes gently and keep the vehicle pointed straight ahead while you slow down. When you are moving slowly enough for it to be safe to do so, pull off the road and stop in a safe location.

Keep your foot firmly on the brake pedal when the vehicle is stopped to prevent the vehicle from rolling forward.

Hill-Start Assist Control (HAC)
A vehicle has the tendency to slide backwards on a steep slope, before depressing the accelerator after a stop. The HAC prevents the vehicle from sliding backwards by automatically operating ...

Cruise control
...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Front Wheel Speed Sensor
Components and components location Components 1. Front wheel speed sensor cable 2. Front wheel speed sensor Repair procedures Removal 1. Remove the front wheel speed sensor mounting bolt (A). ...

Hyundai Creta GS 2014-2019 Owners Manual: Trip computer
The trip computer is a microcomputer- controlled driver information system that displays information related to driving. ■ Type A To change items, press the TRIP button for less than 1 second. ■ Type B To change items, toggle the UP/DOWN arrow switch “▲, ▼” on the ste ...

© 2017-2019 www.hcrmangs.com