Hyundai Creta: What to do in an emergency / Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.
To turn the hazard warning flasher on or off, press the hazard warning flasher button with the ignition switch in any position. The button is located in the center of instrument panel garnish between audio unit and air conditioning unit.
All turn signal lights will flash simultaneously.
- The hazard warning flasher operates whether your vehicle is running or not.
- The turn signals do not work when the hazard flasher is on.
In case of an emergency while driving
If the engine stalls while driving
Reduce your speed gradually,
keeping a straight line. Move cautiously
off the road to a safe place.
Turn on your hazard warning flasher.
Try to start t ...
Other information:
Hyundai Creta GS 2014-2021 Service Manual: Repair procedures
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cover the forward facing sensor.
3.
Head a light to the re ...
Hyundai Creta GS 2014-2021 Service Manual: Rear Door Inside Handle: Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
After loosening the mounting screws, then remove the rear door inside
handle (A).
3.
To instal ...