Hyundai Creta: If you have a flat tire / Jack label
The actual Jack label in the vehicle may differ from the illustration. For more detailed specifications, refer to the label attached to the jack.
1. Model Name
2. Maximum allowable load
3. When using the jack, set your
parking brake.
4. When using the jack, stop the
engine.
5. Do not get under a vehicle that is
supported by a jack.
6. The designated locations under
the frame
7. When supporting the vehicle, the
base plate of jack must be vertical
under the lifting point.
8. Shift into Reverse gear on vehicles
with manual transaxle or move the
shift lever to the P position on
vehicles with automatic transaxle.
9. The jack should be used on firm
level ground.
10. Jack manufacture
11. Production date
12. Representative company and
address
Changing tires
WARNING
A vehicle can slip or roll off of a
jack causing serious injury or
death to you or those nearby.
Take the following safety precautions:
Do not get under a vehicle that
is support ...
Towing
...
Other information:
Hyundai Creta GS 2014-2020 Service Manual: Steering Angle Sensor: Description and operation
Description
Steering angle sensor
The Steering Angle Sensor (SAS) is installed in EPS (Electric Power Steering)
and it sends messages to HECU through CAN communication line.
The SAS is used to determine turning direction and speed of the steering wheel.
The HECU uses t ...
Hyundai Creta GS 2014-2020 Service Manual: Components and components location
Component Location
1. Rear glass defogger
relay (Buil-in engine room relay box)
2. Rear glass defogger switch (Dual type)
3. Rear glass defogger
switch (Manual type)
4. Rear glass defogger
...