Hyundai Creta: Cylinder Block Assembly / Flywheel: Repair procedures

Hyundai Creta GS 2014-2019 Service Manual / Engine Mechanical System / Cylinder Block Assembly / Flywheel: Repair procedures

Removal and installation

1.	Remove the manual transaxle. (Refer to Manual Transaxle System - "Manual Transaxle")

Remove the flywheel (A).

Tightening torque :

71.6 ~ 75.5 N.m (7.3 ~ 7.7 kgf.m, 52.8 ~ 55.6 lb-ft)

3.	Install in the reverse order of removal.

Drive Plate: Repair procedures

Removal and Installation 1. Remove the automatic transaxle. (Refer to Automatic Transaxle System - "Automatic Transaxle") 2. ...

Rear Oil Seal: Repair procedures

Replacement 1. Remove the transaxle. • Automatic Transaxle (Refer to Automatic Transaxle System - "Automatic Transax ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Oil Pressure Switch: Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the engine room under cover. (Refer to Engine And Transaxle Assmbly - "Engine Room Under Cover" ) 3. Drain the e ...

Hyundai Creta GS 2014-2019 Service Manual: Schematic diagrams
Schematic Diagram Canister Canister is filled with charcoal and absorbs evaporated vapor in fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PCM when appropriate conditions are set. Purge Control Solenoid Valve (PCSV) ...