Hyundai Creta: Rear Parking Assist System / Parking Assist Sensor
Hyundai Creta GS 2014-2019 Service Manual / Body Electrical System / Rear Parking Assist System / Parking Assist Sensor
Components and components location
| Component |
Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the rear bumper cover.
(Refer to Body - "Rear Bumper Cover")
|
| 3. |
Disconnect the connector (B) from the parking assist sensor (A).
|
| 4. |
Pull out the sensor (A) by opening the sensor holder (B) out.
|
| Installation |
| 1. |
Install the rear ultra sensor after connecting the connector.
|
| 2. |
Install the rear bumper cover.
|
| 3. |
Connect the negative (-) battery terminal.
|
Description and operation
System Overview
RPAS(Rear Parking Assist System) is an electronic driving aid device warning
driver to be cautious when they park or speed low after detecting an object
on side a ...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: In-car Sensor
Description and operation
Description
The In-car air temperature sensor is built in the heater & A/C control unit.
The sensor contains a thermistor which measures the temperature of the inside.
The signal decided by the resistance value which changes in accordance with
...
Hyundai Creta GS 2014-2019 Service Manual: Special service tools
Special Service Tools
Tool (Number and name)
Illustration
Use
Alternator pulley remover wrench
(09373-27000)
Removal and installation of alterncrtor pulley.
...
В© 2017-2026 www.hcrmangs.com
