Hyundai Creta: Body Side Molding / Rear Wheel Guard: Repair procedures

Replacement
  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the rear tire.
2.
After loosening the mounting clips and nut, then remove the rear wheel guard (A).

3.
To install, reverse the removal procedure.
  
Replace any damaged clips.
Front Wheel Guard: Repair procedures
Replacement    • Put on gloves to protect your hands. ...

Front Mud Guard: Repair procedures
Replacement    • Put on gloves to protect your hands. ...

Other information:

Hyundai Creta GS 2014-2020 Owners Manual: Electronic Stability Control (ESC)
The Electronic Stability Control (ESC) system helps to stabilize the vehicle during cornering maneuvers. ESC checks where you are steering and where the vehicle is actually going. ESC applies braking pressure to any one of the vehicle’s brakes and intervenes in the engine management ...

Hyundai Creta GS 2014-2020 Service Manual: Description and operation
Description Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the memory of the ECM (Engine Control Module). The engine operating conditio ...

© 2017-2020 www.hcrmangs.com