Hyundai Creta: Body (Interior and Exterior) / Body Side Molding
Hyundai Creta GS 2014-2021 Service Manual / Body (Interior and Exterior) / Body Side Molding
- Roof Rack: Repair procedures
- Roof Side Molding: Repair procedures
- A Pillar Garnish: Repair procedures
- Fender Garnish: Repair procedures
- Quarter Garnish: Repair procedures
- Door Garnish: Repair procedures
- Front Wheel Guard: Repair procedures
- Rear Wheel Guard: Repair procedures
- Front Mud Guard: Repair procedures
- Rear Mud Guard: Repair procedures
- Side Sill Molding: Repair procedures
Rear Door Side Weatherstrip: Repair procedures
Replacement
1.
Loosen the rear door checker (B) mounting bolt.
Tightening torque :
21.6 ~ 32.3 N.m (2.2 ~ 3.2 kgf.m,16.9 ~ 23.9 ...
Roof Rack: Repair procedures
Replacement
•
Put on gloves to protect your hands.
...
Other information:
Hyundai Creta GS 2014-2021 Service Manual: Repair procedures
Repair procedures
Bleeding of Brake System
This procedure should be followed to ensure adequate bleeding of air and filling
of the ESC unit, brake lines and master cylinder with brake fluid.
1.
Remove the reservoir cap and fill the brake reservoir with brak ...
Hyundai Creta GS 2014-2021 Service Manual: Master Cylinder
Components and components location
Components
1. Brake booster
2. Master cylinder assembly
3. Reservior
Repair procedures
Removal
1.
Turm ignition switch OFF and disconnect the negative (-) battery cable.
...
© 2017-2021 www.hcrmangs.com