Hyundai Creta: General Information / Specifications

Specifications
Purge Control Solenoid Valve (PCSV)
â–· Specification
Item
Specification
Coil Resistance (Ω)
14.0 ~ 18.0 [20°C(68°F)]

Tightening Torques
Item
kgf.m
N.m
lb-ft
Positive Crankcase Ventilation (PCV) valve installation
0.18 ~ 0.29
1.8 ~ 2.8
1.3 ~ 2.1
Fuel tank air filter installation bolt
0.4 ~ 0.6
3.9 ~ 5.9
2.9 ~ 4.3

Description and operation
Description Emissions Control System consists of three major systems. • The Crankcase Emission Control System prevents blow-by gas from releasing into the a ...

Troubleshooting
Troubleshooting Symptom Suspect area Engine will not start or struggle to start Vapor hose damaged or disconnected ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Fuel Filler Cap: Description and operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap and the filler neck flange contact each other, the ratchet produces a loud clicking noi ...

Hyundai Creta GS 2014-2019 Service Manual: SS-A Solenoid Valve (ON/OFF)
Description and operation Description • SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. • SS-A Solenoid valve (ON/OFF) is installed at valve body. ...

© 2017-2026 www.hcrmangs.com