Hyundai Creta: Tail Gate / Tail Gate Lift: Repair procedures

Replacement
  
Take care to not let the tailgate fall on you as the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open.
1.
Using a screwdriver (A), lift up slightly the socket clips (B) of both ends on the lifter (D), and then remove the lifter from the bracket (C).

2.
Push the socket of the lifter into the bracket for installation.
  
Make sure the tail gate locks and opens properly and locks securely.
Tail Gate Latch
Components and components location Component Location 1. Tail gate latch assembly Repair procedures Replacement &nb ...

Tail Gate Weatherstrip: Repair procedures
Replacement 1. Remove the tail gate weatherstrip (A).    ...

Other information:

Hyundai Creta GS 2014-2021 Service Manual: Rear Door Inside Handle: Repair procedures
Replacement 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. After loosening the mounting screws, then remove the rear door inside handle (A). 3. To instal ...

Hyundai Creta GS 2014-2021 Service Manual: TJ Joint
Components and components location Components [LH] 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Shaft 6. TJ boot band 7. TJ boot 8. Spider assembly 9. Retainer ring 10. TJ housing 11. Housi ...

© 2017-2021 www.hcrmangs.com