Hyundai Creta: Body (Interior and Exterior) / Tail Gate

Hood Latch
Components and components location Component Location 1. Hood latch assembly Repair procedures Replacement 1. After l ...

Repair procedures
Adjustment 1. After loosening the tail gate hinge (A) mounting bolt, adjust the tail gate by moving it up or down, or right or left. 2. ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Line Pressure Control Solenoid Valve
Description and operation Description • Line pressure control solenoid valve is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the line pressure. ...

Hyundai Creta GS 2014-2019 Service Manual: Front Impact Sensor (FIS)
Description and operation Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide a ...

© 2017-2026 www.hcrmangs.com