Hyundai Creta: General Information / Troubleshooting
Hyundai Creta GS 2014-2019 Service Manual / Body (Interior and Exterior) / General Information / Troubleshooting
| Troubleshooting |
|
Symptom |
Suspect Area |
Remedy (Refer to page) |
|
Door glass fails to operate up and down |
Incorrect window glass installation |
Adjust position |
|
Damaged or faulty regulator arm or regulator |
Correct or replace |
|
|
Door does not open or close completely |
Incorrect door installation |
Adjust position |
|
Defective door check assembly |
Correct or replace |
|
|
Door hinge requires grease |
Apply grease |
|
|
Hood does not open or close completely |
Striker and latch not properly aligned |
Adjust |
|
Incorrectly installed hood |
Adjust |
|
|
Incorrect hood bumper height |
Adjust |
|
|
Water leak through windshield end rear window |
Defective seal |
Fill with sealant |
|
Defective flange |
Correct |
Special service tools
Special Service Tools
Tool (Number and name)
Illustration
Use
09880-4F000
Hog ring clip installer
...
Fender
...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Crankshaft Damper Pulley
Components and components location
Components
1. Crankshaft damper pulley
Repair procedures
Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Dreve Belt")
2.
...
Hyundai Creta GS 2014-2019 Service Manual: Components and components location
Components Location
1. ECM (Engine Control Module)
2. Manifold Absolute Pressure Sensor (MAPS)
3. Intake Air Temperature Sensor (IATS)
4. Engine Coolant Temperature Sensor (ECTS)
5. Throttle Position Sensor (TPS) [integrated into ETC Module]
6. Cranksha ...
В© 2017-2026 www.hcrmangs.com
