Hyundai Creta: Body Side Molding / Front Wheel Guard: Repair procedures

Replacement
  
•
Put on gloves to protect your hands.
  
•
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the front tire.
2.
After loosening the mounting clips and screws, then remove the front wheel guard (A).

3.
To install, reverse the removal procedure.
  
•
Replace any damaged clips.
Door Garnish: Repair procedures
Replacement    • Put on gloves to protect your hands. ...

Rear Wheel Guard: Repair procedures
Replacement    • Put on gloves to protect your hands. ...

Other information:

Lincoln Nautilus 2018-2025 Owners Manual: Locating the Tire Sealant and Inflator Kit. Tire Sealant and Inflator Kit Components
Locating the Tire Sealant and Inflator Kit The kit is located under the load floor in the rear of the vehicle. Tire Sealant and Inflator Kit Components Air compressor (inside) Selector switch On and Off button Air pressure gauge Sealant bottle and canister Dual purpose hose: air and repair ...

Hyundai Creta GS 2014-2025 Service Manual: Components and components location
Components Location 1. AVN (PIO) 2. Tweeter speaker 3. Feeder cable joint connector 4. Roof antenna (GPS+AM/FM+TMU) 5. Front door speaker 6. Rear door speaker 7. Back view camera 8. Antenna feeder cable ...

© 2017-2025 www.hcrmangs.com