Hyundai Creta: Tires and wheels / Low aspect ratio tire

The low aspect ratio tires, of which aspect ratio is below 50, are equipped with for the sporty look.

Riding with high aspect ratio tires may be uncomfortable with unpleasant noises, because the low aspect ratio tires are optimized for handling and breaking.

NOTICE

The sidewall of the low aspect ratio tire is thinner than the high aspect ratio tire. Thus, the wheel and the tire may be easily damaged. Thus, follow the below instructions.

- Cautiously drive the vehicle on a rough road or off the road. Otherwise, the tires and wheels may be damaged. After driving those areas, inspect the tires and wheels.
- Slowly drive the vehicle to pass over a pothole, speed bump, manhole, or curb stone. Otherwise, the tires and wheels may be damaged.
- Upon having an impact on the tire, we recommend you to have the tires inspected by an authorized HYUNDAI dealer.
- Inspect the tires every 3,000 km to prevent damage.

NOTICE

Tire sidewall labeling
This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can ...

Fuses
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 fuse panels, one located in the driver’s side panel bolster, the other in the eng ...

Other information:

Lincoln Nautilus 2018-2026 Owners Manual: What Is the Electric Parking Brake. Applying the Electric Parking Brake. Applying the Electric Parking Brake in an Emergency. Manually Releasing the Electric Parking Brake
What Is the Electric Parking Brake The electric parking brake is used to hold your vehicle on slopes and flat roads. Applying the Electric Parking Brake WARNING: Always fully apply the parking brake and make sure you shift into park (P). Failure to follow this instruction could result in persona ...

Hyundai Creta GS 2014-2026 Service Manual: Hazard Lamp Switch: Repair procedures
Inspection 1. The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes. It will be able to diagnose defects of hazard lamp switch with GDS quickly. GDS can operates actuator ...

© 2017-2026 www.hcrmangs.com