Hyundai Creta: Body Side Molding / A Pillar Garnish: Repair procedures

Hyundai Creta GS 2014-2019 Service Manual / Body (Interior and Exterior) / Body Side Molding / A Pillar Garnish: Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	Using a screwdriver or remover, remove the delta garnish (A).

To install, reverse the removal procedure.

•	Replace any damaged clips.

Roof Side Molding: Repair procedures

Replacement • Put on gloves to protect your hands. ...

Fender Garnish: Repair procedures

Replacement • Put on gloves to protect your hands. ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Rear Coil Spring
Components and components location Components 1. Spring lower pad 2. Spring 3. Spring upper pad Repair procedures Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely s ...

Hyundai Creta GS 2014-2019 Service Manual: Brake Pedal
Components and components location Components 1.Stop lamp switch 2. Nut 3. Return spring 4. Brake pedal member assembly 5. Bolt 6. Brake pedal arm Repair procedures Removal 1. Turn ignition switch OFF and d ...