Hyundai Creta: Interior Trim / Cowl Side Trim

Components and components location

Component Location

1. Cowl side trim


Repair procedures

Replacement
  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the front door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
2.
Remove the hood latch release handle.
(Refer to Hood - "Hood Latch Release Handle")
3.
Slighty remove the front door body side weatherstrip.
4.
Using a screwdriver or remover, remove the cowl side trim (A).

5.
To install, reverse the removal procedure.
  
Replace any damaged clips.
Door Scuff Trim
Components and components location Component Location 1. Front door scuff trim 2. Rear door scuff trim Repair procedures Replacement ...

Front Pillar Trim
Components and components location Component Location 1. Front pillar trim Repair procedures Replacement &n ...

Other information:

Hyundai Creta GS 2014-2021 Service Manual: Delivery Pipe: Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Release the residual pressure in fuel line. (Refer the fuel Delivery system - Repair Procedures - "Release Residual Pressur ...

Hyundai Creta GS 2014-2021 Service Manual: Variable Intake Solenoid (VIS) Valve
Description and operation Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ECM opens or closes this valve according to engine condition ...

© 2017-2021 www.hcrmangs.com