Hyundai Creta: Injector / Description and operation

Based on information from various sensors, the ECM can calculate the fuel amount to be injected. The fuel injector is a solenoid-operated valve and the fuel injection amount is controlled by length of injection time. The ECM controls each injector by grounding the control circuit. When the ECM energizes the injector by grounding the control circuit, the circuit voltage should be low (theoretically 0V) and the fuel is injected. When the ECM de-energizes the injector by opening control circuit, the fuel injector is closed and circuit voltage should momentarily peak.

Injector

...

Specifications

Specification Item Specification Coil Resistance (Ω) 13.8 ~ 15.2 [20°C (68°F)] ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Components and components location
Components 1. Front pillar trim 2. Cowl side trim 3. Front door scuff trim 4. Center pillar lower trim 5. Center pillar upper trim 6. Rear door scuff trim 7. Rear pillar trim 8. Front door step trim 9. Rear door step trim ...

Hyundai Creta GS 2014-2019 Service Manual: Evaporator Temperature Sensor
Description and operation Description The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. The evaporator temperature sensor has the Negative Temper ...