Hyundai Creta: Engine Control / Fuel System
Hyundai Creta GS 2014-2020 Service Manual / Engine Control / Fuel System
- General Information
- Engine Control System
- Description and operation
- Components and components location
- Engine Control Module (ECM)
- ETC (Electronic Throttle control) System
- Manifold Absolute Pressure Sensor (MAPS)
- Intake Air Temperature Sensor (IATS)
- Engine Coolant Temperature Sensor (ECTS)
- Crankshaft Position Sensor (CKPS)
- Camshaft Position Sensor (CMPS)
- Knock Sensor (KS)
- Heated Oxygen Sensor (HO2S)
- Accelerator Position Sensor (APS)
- Injector
- Description and operation
- Specifications
- Schematic diagrams
- Repair procedures
- Purge Control Solenoid Valve (PCSV)
- CVVT Oil Control Valve (OCV)
- Variable Intake Solenoid (VIS) Valve
- Fuel Delivery System
- Components and components location
- Repair procedures
- Fuel Tank: Repair procedures
- Fuel Pump: Repair procedures
- Fuel Filter: Repair procedures
- Fuel Pump Motor: Repair procedures
- Fuel Sender: Repair procedures
- Fuel Pressure Regulator: Repair procedures
- Fuel Line: Repair procedures
- Filler-Neck Assembly: Repair procedures
- Accelerator Pedal: Repair procedures
- Delivery Pipe: Repair procedures
CVVT (Continuously Variable Valve Timing) System: Description and operation
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve
timing of the intake and exhaust valve in accordance with the ECM control signal
which is ...
Other information:
Hyundai Creta GS 2014-2020 Service Manual: Repair procedures
Adjustment
Glass Adjustment
•
Check the glass run channel for damage or deterioration, and
replace them if necessary.
1.
Remove t ...
Hyundai Creta GS 2014-2020 Service Manual: Rheostat: Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad side cover.
3.
Remove the crash pad lower panel (A).
(Refer to Body - "Crash Pad Lower Panel")
...
© 2017-2020 www.hcrmangs.com