| Removal |
| 1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
|
| 2. |
Disconnect the fuel sender connector (A).
|
| 3. |
Remove the fuel sender (A) after releasing the fix hook.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Fuel Pump Motor: Repair procedures
Fuel Pressure Regulator: Repair proceduresHyundai Creta GS 2014-2019 Service Manual: Repair procedures
Component Replacement After
Deployment
•
Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing of the
...
Hyundai Creta GS 2014-2019 Service Manual: Steering Angle Sensor: Description and operation
Description
Steering angle sensor
The Steering Angle Sensor (SAS) is installed in EPS (Electric Power Steering)
and it sends messages to HECU through CAN communication line.
The SAS is used to determine turning direction and speed of the steering wheel.
The HECU uses t ...