Hyundai Creta: Evaporative Emission Control System / Fuel Tank Air Filter: Repair procedures

Removal
1.
Remove the fuel tank.
(Refer to Fuel Delivery System - "Fuel Tank")
2.
Disconnect the vapor hoses (A).
3.
Remove the fuel tank air filter mounting bolts (B).

4.
Remove the fuel tank air filter.
Installation
1.
Install in the reverse order of removal.
fuel tanke air filter mounting bolt :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Fuel Filler Cap: Description and operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel f ...

Exhaust Emission Control System
...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Power Seat Control Switch
Schematic diagrams Circuit Diagram Repair procedures Inspection 1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat switch. ...

Hyundai Creta GS 2014-2019 Service Manual: Evaporator Temperature Sensor
Description and operation Description The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. The evaporator temperature sensor has the Negative Temper ...

В© 2017-2026 www.hcrmangs.com