Hyundai Creta: Body Side Molding / Rear Mud Guard: Repair procedures

Hyundai Creta GS 2014-2019 Service Manual / Body (Interior and Exterior) / Body Side Molding / Rear Mud Guard: Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	After loosening the mounting clip and screws, then remove the rear mud guard (A).

To install, reverse the removal procedure.

•	Replace any damaged clips.

Front Mud Guard: Repair procedures

Replacement • Put on gloves to protect your hands. ...

Side Sill Molding: Repair procedures

Replacement • Put on gloves to protect your hands. ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Tire: Repair procedures
• Using tires and wheel other than the recommended sizes could cause unusual handling characteristics and poor vehicle control, resulting in a serious accident. ...

Hyundai Creta GS 2014-2019 Owners Manual: Engine coolant
The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a year, at the beginning of the winter season, and before traveling to a colder climate. N ...