Hyundai Creta: Maintenance / Tires and wheels
Tire care
For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommended for your vehicle.
- Recommended cold tire inflation pressures
- Checking tire inflation pressure
- Tire rotation
- Wheel alignment and tire balance
- Tire replacement
- Wheel replacement
- Tire traction
- Tire maintenance
- Tire sidewall labeling
- Low aspect ratio tire
Reset items
Items should be reset after the battery
has been discharged or the battery
has been disconnected.
Auto up/down window
(See chapter 3)
Climate control system
(See chapter 3)
Audio (Se ...
Recommended cold tire inflation
pressures
All tire pressures (including the
spare) should be checked when the
tires are cold. “Cold Tires” means the
vehicle has not been driven for at
least three hours or driven less than
1.6 km ...
Other information:
Hyundai Creta GS 2014-2019 Owners Manual: Manual transaxle operation
The manual transaxle has 6 forward
gears. The transaxle is fully synchronized
in all forward gears so shifting
to either a higher or a lower gear is
easily accomplished.
WARNING
Before leaving the driver’s seat,
always make sure the shift lever is
in 1st gear when the vehicle is
...
Hyundai Creta GS 2014-2019 Service Manual: Front Hub / Knuckle / Tone Wheel
Components and components location
Components
1. Split pin
2. Caulking nut
3. Brake disc
4. Hub
5. Wheel bearing
6. Snap ring
7. Dust cover
8. Knuckle
9. Driveshaft
Repair procedures
Removal
1.
Rem ...
