Hyundai Creta: Maintenance
Hyundai Creta GS 2014-2019 Owners Manual / Maintenance
- Engine compartment
- Maintenance services
- Owner maintenance
- Scheduled maintenance service
- Normal maintenance schedule (Except Mexico) – Gasoline engine
- Maintenance under severe usage conditions (Except Mexico) – Gasoline engine
- Normal maintenance schedule (Except Mexico) - Diesel engine
- Maintenance under severe usage conditions - Diesel engine
- Explanation of scheduled maintenance items
- Engine oil
- Engine coolant
- Brake/clutch fluid
- Washer fluid
- Parking brake
- Fuel filter (For Diesel)
- Air cleaner
- Climate control air filter
- Wiper blades
- Battery
- Tires and wheels
- Recommended cold tire inflation pressures
- Checking tire inflation pressure
- Tire rotation
- Wheel alignment and tire balance
- Tire replacement
- Wheel replacement
- Tire traction
- Tire maintenance
- Tire sidewall labeling
- Low aspect ratio tire
- Fuses
- Instrument panel fuse replacement
- Engine compartment panel fuse replacement
- Fuse/Relay panel description
- Light bulbs
- Headlight, position light, turn signal light, static bending light and front fog light bulb replacement
- Side repeater lamp bulb replacement
- Rear combination light bulb replacement
- High mounted stop light
- License plate light bulb replacement
- Interior light bulb replacement
- Appearance care
- Emission control system
Emergency commodity
Your vehicle is equipped with emergency
commodities to help you
respond to emergency situation.
Fire extinguisher
If there is small fire and you know
how to use the fire extinguisher, follow
...
Engine compartment
■ Gasoline Engine (Gamma 1.6 MPI) - Right Hand Drive
■ Gasoline Engine (Gamma 1.6 MPI) - Left Hand Drive
1. Engine oil filler cap
2. Engine oil dipstick
3. Brake/clutch fluid reservoir
...
Other information:
Hyundai Creta GS 2014-2019 Service Manual: Flow diagram
Power Flow Chart
P,N
UD/B
LR/B
26/B
35R/C
OD/C
OWC
●
▣ Direction of Rotation
▶Lower & Reverse B ...
Hyundai Creta GS 2014-2019 Service Manual: Mic: Repair procedures
Inspection
1.
Disconnector the negative (-) battery terminal.
2.
Remove the mounting screws (2EA).
And then remove the overhead console (A).
3.
Remove the overhead console after disconnect the c ...
© 2017-2026 www.hcrmangs.com
