Vehicle Stability Management (VSM) helps ensure the vehicle stays stable when accelerating or braking suddenly on wet, slippery and rough roads where traction over the four tires can suddenly become uneven.
WARNING
Take the following precautions when using the Vehicle Stability Management (VSM):
VSM ON condition
The VSM operates when:
When operating
When you apply your brakes under conditions which may activate the ESC, you may hear sounds from the brakes, or feel a corresponding sensation in the brake pedal. This is normal and it means your VSM is active.
Information
The VSM does not operate when:
) is on.VSM OFF condition
To cancel VSM operation, press the
ESC OFF button. ESC OFF indicator
light (
) will illuminate.
To turn on VSM, press the ESC OFF button again. The ESC OFF indicator light will go out.
WARNING
If ESC indicator light (
) or
EPS
warning light (
) stays on, your
vehicle may have a malfunction
with the VSM system. When the
warning light illuminates we recommend
that the vehicle be
checked by an authorized
HYUNDAI dealer as soon as possible.
NOTICE
Driving with wheels and tires with different sizes may cause the ESC system to malfunction. Before replacing tires, make sure all four tires and wheels are the same size. Never drive the vehicle with different sized tires and wheels installed.
Electronic Stability Control (ESC)
Hill-Start Assist Control (HAC)Hyundai Creta GS 2014-2019 Service Manual: Components and components location
Components
1. Rear door trim
2. Rear door belt inside weatherstrip
3. Rear door trim seal
4. Rear door panel
5. Rear door belt outside weatherstrip
6. Rear door body side weatherstrip
7. Rear door side weatherstrip
8. Rear door hinge
...
Hyundai Creta GS 2014-2019 Service Manual: Repair procedures
Component Replacement After
Deployment
•
Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing of the
...