| Inspection |
| 1. |
With the washer motor connected to the reservoir tank, fill the reservoir
tank with water.
|
| 2. |
Check that the motor operates normally and the washer motor runs and
water sprays from the front nozzles.
|
| 3. |
If they are abnormal, replace the washer motor.
|
Rear Washer Switch: Repair proceduresHyundai Creta GS 2014-2019 Service Manual: Power Door Lock Actuators: Repair procedures
Inspection
Front Door Lock Module Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front door module.
(Refer to Body - "Front Door Module")
...
Hyundai Creta GS 2014-2019 Service Manual: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the main crash pad assembly.
(Refer to Body - "Main Crash Pad Assembly")
3.
Remove the body control module (A) after disconne ...